Installing the coin cell battery
1. Connect the coin cell battery cable to the system board.
2. Attach the coin cell battery to the adhesive on the system board.
3. Install the:
a. base cover
b. battery
4. Follow the procedure in After working inside your computer.
Removing the audio connector board
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. battery
b. base cover
3. To remove the audio connector board:
a. Disconnect the audio connector board cable from the system board.
b. Remove the screw that secures the audio connector board to the computer.
c. Lift the audio connector board from the computer.
15
To Next Page
Loading...
