2
Removing and installing components
This section provides detailed information on how to remove or install the components from your
computer.
Recommended tools
The procedures in this document require the following tools:
• Small flat blade screwdriver
• Phillips #0 screwdriver
• Phillips #1 screwdriver
• Small plastic scribe
Removing the Secure Digital (SD) card
1. Follow the procedure in Before working inside your computer.
2. Press the SD card to release it from the computer.
3. Slide the SD card out of the computer.
Installing the Secure Digital (SD) card
1. Slide the SD card into the slot and press it until it clicks into place.
2. Follow the procedure in After working inside your computer.
Removing the battery
1. Follow the procedure in Before working inside your computer.
2. Slide the release latches to the unlock position and pull the battery from the computer.
8