5. Lift and remove the system board from the computer.
Installing the system board
1. Insert the system board into the computer.
2. Tighten the screws to secure the system board to the computer.
3. Connect the following cables to the connectors on the system board:
a. power
b. display cable bracket and display
c. network connector
d. touch panel
e. speaker
f. audio connector
g. touchpad
4. Install the:
a. heat sink
b. system fan
c. WWAN card
d. WLAN card
e. hard drive
f. audio connector board
g. coin cell battery
h. keyboard
i. keyboard trim
j. memory module
k. base cover
l. SIM card
m. battery
n. SD card
5. Follow the procedure in After working inside your computer.
27
To Next Page
Loading...
