Option Description
NOTE: Deleting the admin password automatically
deletes the system password and the hard drive
password.
NOTE: Successful password changes take effect
immediately.
Default Setting: Not set
System Password Allows you to set, change or delete the system password.
NOTE: Successful password changes take effect
immediately.
Default Setting: Not set
Internal HDD-0 Password Allows you to set, change, or delete the administrator
(admin) password.
Default Setting: Not set
Strong Password Allows you to enforce the option to always set strong
passwords.
Default Setting: Enable Strong Password is disabled.
Password Configuration You can define the length of your password. Min = 4, Max =
32
Password Bypass Allows you to enable or disable the permission to bypass the
System and the Internal HDD password, when they are set.
The options are:
• Disabled (Default Setting)
• Reboot bypass
Password Change Allows you to enable the disable permission to the System
and Hard Drive passwords when the admin password is set.
Default Setting: Allow Non-Admin Password Changes is not
selected.
Non-Admin Setup Changes Allows you to determine whether changes to setup option
are permitted when an administrator password is set. The
option is disabled.
• Allows Wireless Switch Changes
Computrace Allows you to activate or disable the optional Computrace
software The options are:
• Deactivate (Default Setting)
• Disable
• Activate
NOTE: The Activate and Disable options will
permanently activate or disable the feature and no
further changes will be allowed.
32
To Next Page
Loading...
