Table 34. System setup options—Storage menu
Storage
SATA/NVMe Operation
SATA/NVMe Operation Sets the operating mode of the integrated SATA hard drive controller.
By default, the RAID On option is selected. The storage device is configured for
RAID On mode.
Storage Interface Displays the information of various onboard drives.
Port Enablement Enables or disables the M.2 PCIe SSD option.
By default, the M.2 PCIe SSD option is enabled.
Drive Information Displays the information of onboard drives.
Table 35. System setup options—Display menu
Display
Display Brightness
Brightness on battery power Enables to set the screen brightness when the computer is running on battery
power.
By default, the screen brightness is set to 50 when the computer is running on
battery power.
Brightness on AC power Enables to set the screen brightness when the computer is running on AC power.
By default, the screen brightness is set to 100 when the computer is running on
AC power.
Touchscreen Enables or disables the touch screen option.
By default, the Touchscreen option is enabled.
Enable EcoPower Enables or disables the EcoPower.
By default, the EcoPower option is enabled.
Full Screen Logo Enables or disables the computer to display a full-screen logo, if the image
matches screen resolution.
By default, the Full Screen Logo option is disabled.
Table 36. System setup options—Connection menu
Connection
Integrated NIC Controls the on-board LAN Controller.
By default, the Enabled with PXE option enabled.
Wireless Device Enable
WLAN Enables or disables the internal WLAN device.
By default, the WLAN option enabled.
Bluetooth Enables or disables the internal Bluetooth device.
By default, the Bluetooth option enabled.
Enable UEFI Network Stack Enables or disables the UEFI Network Stack and controls the onboard LAN
Controller.
By default, the Enable UEFI Network Stack option is enabled.
Wireless Radio Control
BIOS Setup 105
To Next Page
Loading...
