I/O board
Removing the I/O board
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
About this task
The following images indicate the location of the I/O board and provide a visual representation of the removal procedure.
Figure 37. Removing the I/O board
CAUTION:
The system has a coin-cell battery that is connected to the I/O board. Disconnecting the I/O
board cable resets the BIOS setup program settings to default. Note the BIOS setup program settings before
disconnecting the I/O board cable.
Removing and installing Field Replaceable Units (FRUs) 67
To Next Page
Loading...
