Base cover
Removing base cover
1. Follow the procedure in Before working inside your computer.
2. To release the base cover:
a. Loosen the eight (M2.5 x 6.0) captive screws that secure the base cover to the system [1].
NOTE: Exercise caution when loosening the screws. Angle the screw driver to match the head of the screws
(Bottom Two) to avoid a possible stripped screw head.
b. Use a plastic scribe to release the base cover from the edge [2].
3. Lift the base cover from the system.
Removing and installing components 13
To Next Page
Loading...
