Dell Latitude E5520 - Installing the Power Connector

Related Links
Installing the Power Connector
Installing the Power Connector
1. Secure the power connector to the routing channel on the processor fan.
2. Replace the system board.
3. Replace the support brackets.
4. Replace the modem card.
5. Replace the bluetooth card.
6. Replace the audio board.
7. Replace the display assembly.
8. Replace the ExpressCard/Smart Card/PCMCIA module.
9. Remove the palm rest.
10. Replace the processor.
11. Replace the heat sink.
12. Remove the CPU door.
13. Replace the wireless wide area network (WWAN).
14. Replace the wireless local area network (WLAN).
15. Replace the hard drive.
16. Replace the optical drive.
17. Remove the keyboard.
18. Remove the keyboard trim.
19. Replace the memory.
20. Replace the back panel.
21. Replace the secure digital (SD) card.
22. Replace the subscriber identity module (SIM) card.
23. Replace the battery.
24. Follow the procedures in After Working Inside Your Computer.
Related Links
Removing the Power Connector
74