Option Description
Default Setting: COM1
SATA Operation Allows you to configure the internal SATA
hard-drive controller. The options are:
• Disabled
• ATA
• AHCI
• RAID On
Default Setting: RAID On
NOTE: SATA is configured to support
RAID mode.
USB Controller Allows you to control the USB controller.
The options are:
• Enable USB Controller
• Diasanle USB Mass Storage Dev
• Disable USB Controller
Default Setting: Enable USB Controller
Diskette Drive Allows you to activate the diskette drives.
The options are:
• Disabled
• Enabled
Default Setting: Enabled
Miscellaneous Devices Allows you to enable or disable the
following devices:
• Internal Modem
• Fixed Bay
• eSATA Ports
• Hard Drive Free Fall Protection
• External USB Port
• Microphone
• Camera
You can also enable or disable Media Card
and 1394 together.
Default Setting: All devices are enabled.
122
To Next Page
Loading...
