Appearance Description Next Step
Blinkin
g
Solid Solid Processor error Replace the system board.
Solid Blinkin
g
Solid Memory is
detected but has
errors
1. Reseat the memory.
2. If two modules are installed
remove one and test. Try the other
module in the same slot and test.
Test the other slot with both
modules.
3. Replace the memory.
4. Replace the system board.
Blinkin
g
Blinkin
g
Blinkin
g
System board
error
Replace the system board.
Blinkin
g
Blinkin
g
Solid Video card error Replace the system board.
Blinkin
g
Blinkin
g
Off Keyboard error
1. Reseat the keboard cable.
2. Replace the keyboard.
Blinkin
g
Off Blinkin
g
USB controller
error
Unplug the USB device (if any)
Solid Blinkin
g
Blinkin
g
No SODIMMs are
installed
1. Install supported memory modules.
2. If memory is already present,
reseat the module(s) one at a time
in each slot.
3. Try known good memory from
another computer or replace the
memory.
4. Replace the system board.
Blinkin
g
Solid Blinkin
g
Display panel
error
1. Reseat the display cable.
2. Replace the display panel.
3. Replace the video card/system
board.
132
To Next Page
Loading...
