5. Replace and tighten the screws to secure the display cable bracket to the system
board.
6. Route the antenna cables through the system board.
7. Replace and tighten the screws to secure the display panel to the computer.
8. Route the antenna cables to their original position.
9. Install the display hinge covers.
10. Install the palmrest assembly.
11. Install the keyboard.
12. Install the keyboard trim.
13. Install the hard drive.
14. Install the ExpressCard.
15. Install the base cover.
16. Install the optical drive.
17. Install the Secure Digital (SD) card.
18. Install the battery.
19. Follow the procedures in After Working Inside Your Computer.
Related Links
Removing The Display Assembly
79
To Next Page
Loading...
