36 | Setting Up the Monitor
Organizing Your Cables
After attaching
all necessary cables (see
Organizing Your Cables
), the cable cover (see
Attaching the Cable Cover
), and the monitor stand (see
Attaching the Stand
), organize all
cables as shown above.
Connecting the Computer
To connect the monitor to your computer:
NOTE: See also
Connecting Your Monitor
.
1 Plug the other end of the conn
ected VGA or DP or HDMI cable to your computer.
2 Plug the USB upstream cable
to an appropriate USB 2.0 port on your computer.
3 Connect the
USB 2.0 peripherals to the downstream USB 2.0 ports on the monitor.
4 Plug the power cables for your computer and monitor into a nearby outlet.
5 Turn On the monitor and the computer.
CAUTION: The
graphics are used for the purpose
of illustration only. Appearance of
the computer may vary.
To Next Page
Loading...
