Dell Networking 7048 - Release Notes; Added Functionality in this Release; C H a N G E D F U N C T I O N a L I T y I N T H I S R E L E a S

PowerConnect 8132/8164/8132F/8164F/8024/8024F/M8024/M8024-k/
M6220/M6348/7024/7048/7024P/7048P/7024F/7048R/7048R-RA
Release Notes
System Firmware Version 5.1.0.1 Page 7
Added Functionality in this Release
This section contains a list of features added in this release that are new for at least one switch listed in the Hardware Supported
section above.
Release 5.1.0.1
 IGMP Snooping Improvements
 IP Multicast Enhancements
 Support for B1 CPU – only on PC8100 series
 New Browser Support
• Mozilla Firefox 14
• Internet Explorer 9
• Google Chrome 21
 Static Route Maximum Increased to 512 (for all switches except for M6220 series)
 USB Auto-configuration expanded for multiple MAC Address support
 Ability to reset stack port counters
 Increased Maximum number of dot1x clients per port to 24
 Commands to remove signed certificates/Keys
 Support for Additional transceivers/optics
Release 5.0.1.3
 Added PoE DC Disconnect HW support – on PC7000 series
Release 5.0.0.4
 Added Native EEE Support for the PC8100 10GBaseT Ports
 802.1Qaz (ETS) – on 8100 series
 Support for 40 Gig (QSFP+) interfaces
 Support for Bootcode upgrade from pre-4.x image to 5.x image without manual system reset.
 Local Preference for LAG
 Private VLAN
 CLI output filtering
 Routing Improvements for OSPF
 UDLD
 Administrative Profiles
 AAA Authorization
 TACACS+ Accounting
 Stacking over QSFP+ ports
 QSFP+ diagnostics
 sFlow Support on Port Channels
Release 4.2.2.3
 No Added Functionality in this Release