About this task
The following images indicate the location of the Dell Ultra Speed Drive Gen 4 card and provide a visual representation of the
removal procedure.
Steps
1. Lift the pull tab and open the expansion-card door.
2. Push and hold the securing tab on the PCIe slot and lift the Dell Ultra Speed Drive Gen 4 card from the PCIe x4 card slot.
Installing the Dell Ultra Speed Drive Gen 4 card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the Dell Ultra Speed Drive Gen 4 card and provides a visual representation of the
installation procedure.
60
Removing and installing components
To Next Page
Loading...
