Removing the Heat Sink and Processor
Removing The Coin-Cell Battery
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the cover.
3. Press the release latch away from the coin-cell battery to allow the battery to pop-up from the socket.
4. Lift the coin-cell battery out of the computer.
Related Links
Installing The Coin-Cell Battery
Installing The Coin-Cell Battery
1. Place the coin-cell battery into its slot on the system board.
2. Press the coin-cell battery downwards until it is secured.
3. Install the cover.
4. Follow the procedures in After Working Inside Your Computer.
Related Links
Removing the Coin-Cell Battery
Removing the Power-Switch Cable
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the cover.
3. Remove the front bezel.
4. Remove the optical drive.
20
To Next Page
Loading...
