2
Removing and Installing Components
This section provides detailed information on how to remove or install the components from your computer.
Removing the Cover
1. Follow the procedures in Before Working Inside Your Computer.
2. Pull up the cover-release-latch at the side of the computer.
3. Lift the cover upward to a 45–degree angle and remove it from the computer.
Related Links
Installing the Cover
Installing the Cover
1. Place the cover on the computer.
2. Press down on the cover till it clicks into place.
3. Follow the procedures in After Working Inside Your Computer.
Related Links
Removing the Cover
9
To Next Page
Loading...
