5 To remove the optical drive from the optical drive cage:
a Press the optical drive release latch [1] and slide the optical drive forward. [2]
b Remove the optical drive from the optical drive cage [3].
Installing the optical drive
1 Slide the optical drive into the optical drive cage.
2 Align the tabs on the optical cage with the slots on the computer.
3 Lower the optical drive cage into the computer and lock the latch.
4 Connect the data and power cables to the optical drive.
5 Install the:
a hard drive assembly
b front bezel
c cover
6 Follow the procedure in After Working Inside Your Computer.
Removing and installing components 13
To Next Page
Loading...
