Table 15. Cloud desktop
Option Description
Server Lookup Method Allows you to specify how the cloud desktop software will lookup server addresses.
• Static
• DNS (Default)
Server Name Allows you to specify the name of the server
Server IP Address Specifies the primary static IP address of the cloud desktop server. The default IP address is
255.255.255.255
Server port Specifies the primary port of the cloud desktop. The default setting is 06910.
Client Address Method Specifies how the client will obtain the IP address.
• Static IP
• DHCP (Default)
Client IP address Specifies the static IP address of the client. The default IP address is 255.255.255.255
Client Subnet Mask Specifies the subnet mask address of the client. The default IP address is 255.255.255.255
Client Gateway Specifies the gateway address of the client. The default IP address is 255.255.255.255
DNS IP Address Specifies the DNS IP address of the client. The default IP address is 255.255.255.255
Domain Name Specifies the domain name of the client.
Advanced Allows you to turn on the Verbose mode for advanced debugging. This option is disabled by
default.
Table 16. System logs
Option Description
BIOS Events Displays the system event log and allows you to:
• Clear Log
• Mark all Entries
Table 17. Advanced configurations
Option Description
ASPM Allows you to activate the state power management.
• Auto (Default)
• Disabled
• L1 Only
Updating the BIOS
It is recommended to update your BIOS (System Setup), on replacing the system board or if an update is available. For laptops,
ensure that your computer battery is fully charged and connected to a power outlet
1 Restart the computer.
2 Go to Dell.com/support.
3 Enter the Service Tag or Express Service Code and click Submit.
System Setup 37
To Next Page
Loading...
