Installing speaker
Steps
1. Align the slots on the speaker with the slots on the system fan.
2. Tighten the M2.5X4 screws to secure the speaker to the system fan.
3. Route the speaker cable through the retention hooks on the system fan.
4. Install the:
a. system fan
b. cover
5. Follow the procedure in After working inside your computer.
Memory module
Removing memory module
Steps
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. cover
b. system fan
3. To remove the memory module:
20
Removing and installing components
To Next Page
Loading...
