Dell OptiPlex 3050 Micro - Troubleshooting

Altitude (Simulated)
● Operating: –1,000 ft to 10,000 ft
● Non-Operating: –1,000 ft to 40,000 ft
Product Ecological Compliance RoHS
Reliability
● Uncorrectable Bit Error Rate (UBER): 1 sector per 10
15
bits
read
● Mean Time Between Failure (MTBF): 1.6 million hours
Environmental Conditions
Table 3. Temperature, Shock, Vibration
Temperature M.2 2280 form factor
Operating
1
Non-operating
2
0–70º C
-10–85º C
Temperature Gradient
3
Operating
Non-operating
30º C/hr (Typical)
30º C/hr (Typical)
Humidity
Operating
Non-operating
5–95%
5–95%
Shock and Vibration Range
Shock
4
Operating
Non-operating
1500 G / 0.5 ms
230 G / 3 msec
Vibration
5
Operating
Non-operating
2.17 G
RMS
(5–800Hz) Max
3.13 G
RMS
(5–800Hz) Max
NOTES:
1. Operating temperature is targeted for 70º C.
2. Please contact your Intel representative for details on the non-operating temperature range.
3. Temperature gradient measured without condensation.
4. Shock specification assume the device is mounted securely with the input vibration applied to the drive-mounting screws.
Stimulus may be applied in the X,Y, or Z axis shock specification is measured using Root Mean Squared (RMS) value.
5. Vibration specifications assume the device is mounted securely with the input vibration applied to the drive-mounting
screws. Stimulus may be applied in the X, Y, or Z axis. Vibration specificities is measured using RMS value.
Troubleshooting
Steps
1. The Intel Optane Memory model name "NVME INTEL MEMPEK1W01" in Device Manager does not match in the Intel Rapid
Storage Technology user interface; it only shows a part of the serial number information. This is a known issue and does not
impede the functionality of the Intel Optane Memory.
Device Manager: NVME INTEL MEMPEK1W01
IRST UI: INTEL MEMPEK1W016GA
30
M.2 Intel Optane Memory Module 16 GB