Table 13. Power Management (continued)
Option Description
● LAN or WLAN - Allows the system to be powered on by
special LAN or wireless LAN signals.
● LAN Only - Allows the system to be powered on by
special LAN signals.
● LAN with PXE Boot - A wakeup packet sent to the
system in either the S4 or S5 state, that will cause the
system to wake-up and immediately boot to PXE.
● WLAN Only - Allows the system to be powered on by
special WLAN signals.
This option is Disabled by default.
Block Sleep Allows you to block entering to sleep (S3 state) in OS
environment. This option is disabled by default.
Intel Ready Mode Allows you to enable the capability of Intel Ready Mode
Technology. This option is disabled by default.
Table 14. POST Behavior
Option Description
Numlock LED Allows you to enable or disable the Numlock feature when
your computer starts. This option is enabled by default.
Keyboard Errors Allows you to enable or disable the keyboard error reporting
when the computer starts. This option is disabled by default.
Fast Boot This option can speed up the boot process by bypassing some
compatibility steps:
● Minimal — The system boots quickly, unless the BIOS has
been updated, memory changed, or the previous POST did
not complete.
● Thorough — The system does not skip any steps in the
boot process.
● Auto — This allows the operating system to control
this setting (this works only when the operating system
supports Simple Boot Flag).
This option is set to Minimal by default.
Table 15. Manageability
Option Description
USB provision This option is not selected by default.
MEBx Hotkey This option is selected by default.
Table 16. Virtualization Support
Option Description
Virtualization This option specifies whether a Virtual Machine Monitor
(VMM) can utilize the additional hardware capabilities
provided by Intel® Virtualization Technology. Enable Intel
Virtualization Technology - This option is enabled by
default.
VT for Direct I/O
Enables or disables the Virtual Machine Monitor (VMM) from
utilizing the additional hardware capabilities provided by Intel®
Virtualization technology for direct I/O. Enable VT for Direct
I/O - This option is enabled by default.
42 BIOS setup
To Next Page
Loading...
