Dell OptiPlex 5000 Small Form Factor User Manual

Steps
1. Align and insert the front-bezel tabs with the slots on the chassis.
2. Rotate the front bezel towards the chassis and snap it into place.
Next steps
1. Install the side cover.
2. Follow the procedure in after working inside your computer.
Intrusion switch
Removing the intrusion switch
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the side cover.
About this task
The following images indicate the location of the intrusion switch and provide a visual representation of the removal procedure.
18
Removing and installing components

Dell OptiPlex 5000 Small Form Factor Specifications

General

Brand	Dell
Model	OptiPlex 5000 Small Form Factor
Category	Desktop
Language	English