Next steps
1. Install the hard-drive and optical-drive cage.
2. Install the 3.5-inch hard-drive.
3. Install the 2.5-inch hard-drive.
4. Install the front bezel.
5. Install the side cover.
6. Follow the procedure in after working inside your computer.
WLAN antenna
Removing the internal WLAN antenna
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the side cover.
3. Remove the front bezel.
4. Remove the 2.5-inch hard-drive.
5. Remove the 3.5-inch hard-drive.
6. Remove the hard-drive and optical-drive cage.
7. Remove the WLAN card.
About this task
The following images indicate the location of the internal WLAN antenna and provide a visual representation of the removal
procedure.
Steps
1. Remove the antenna cables from the routing guides on the chassis.
50
Removing and installing components
To Next Page
Loading...
