4. Install the heatsink.
5. Install the heatsink fan.
6. Close the front panel door.
7. Install the:
a. Front bezel
b. Side cover
8. Follow the procedure in After working inside your computer.
System fan
Removing system fan
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. Side cover
b. Front bezel
3. Open the front panel door.
4. To remove the system fan:
a. Disconnect the intrusion switch cable from the connector on the system board [1].
b. Unroute the intrusion switch cable from the fan grommet [2].
62
Removing and installing components
To Next Page
Loading...
