Why does my Dell Desktop say time-of-day clock lost power?
If your Dell Desktop displays 'TIME-OF-DAY CLOCK LOST POWER', connect your computer to an electrical outlet to charge the battery. If the problem persists, try to restore the data by entering the System Setup program, then immediately exit the program.
What to do if my Dell OptiPlex 5090 Small Form Factor CPU has failed?
Run the Intel CPU diagnostics tools. If the problem persists, replace the system board.
What to do if a memory module is loose in Dell OptiPlex 5090 Small Form Factor?
Reinstall the memory module or, if necessary, replace it in your Dell Desktop.
How to fix BIOS Recovery image not found on Dell Laptop?
Flash the latest BIOS version. If the problem persists, you may need to replace the system board.
Why does my Dell OptiPlex 5090 Small Form Factor Desktop have 'Memory configuration or incompatible error'?
Memory subsystem configuration activity is in progress. If you can assist with troubleshooting, try removing the memory modules one by one on the motherboard to determine which one failed. Also, combine the configuration to validate the appropriate combination.
What to do if my Dell Desktop has Intel ME (Management Engine) time-out error?
Timeout waiting on ME to reply to HECI message. If the problem persists, replace the system board.
What does 'Bad Command Or File Name' mean on my Dell OptiPlex 5090 Small Form Factor and how to fix it?
If your Dell Desktop displays 'Bad Command Or File Name', ensure that you have spelled the command correctly, put spaces in the proper place, and used the correct path name.
What to do if my Dell Laptop has system board failure?
Try flashing the latest BIOS version. If the issue remains, the system board may need to be replaced.
What causes power rail failure on Dell Desktop?
If your Dell Desktop experiences a power rail failure, it means that EC ran into power sequencing failure. If the problem persists, replace the system board.
What to do if auxiliary device failure on Dell Desktop?
If your Dell Desktop experiences an auxiliary device failure, the touchpad or external mouse may be faulty. For an external mouse, check the cable connection. Enable the Pointing Device option in the System Setup program.
To Next Page
General