Dell OptiPlex Micro Form Factor - OptiPlex Micro All-in-One Stand MFS22; All-in-One Stand Installation Steps

OptiPlex Micro All-in-One Stand - MFS22
About this task
Steps
1. Install the two screws (M3x6) to secure the AC adapter sleeve (upsell) to the all-in-one stand.
NOTE: The AC adapter sleeve is an optional component that needs to be purchased separately.
2. Install the four step (M4x4) screws on the chassis.
7
30 OptiPlex Micro All-in-One Stand - MFS22