Dell P113G - Procedure

Replacing the power button with fingerprint
reader
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1. Align the power button with fingerprint reader on the keyboard bracket and adhere the tape that secures the power button
with fingerprint reader on the keyboard bracket.
2. Place the power button with fingerprint reader on the keyboard bracket.
3. Connect the fingerprint-reader cable to power button with fingerprint reader and close the latch to secure the cable.
4. Follow the procedure from step 3 to step 8 in "Replacing the keyboard".
Post-requisites
1. Replace the system board.
2. Replace the I/O board.
3. Replace the display assembly.
4. Replace the fan.
5. Replace the speakers.
35
Replacing the power button with fingerprint reader 67