About your monitor │ 13
*To avoid signal interference, when a wireless USB device has been connected to a
USB downstream port, it is NOT recommended to connect any other USB devices
to the adjacent port(s).
4 HDMI port Connect your computer with the HDMI cable.
5 Stand lock feature To lock the stand to the monitor using a M3 x
6
mm screw (screw not included).
6 DVI port Connect your computer with the DVI cable.
7 VGA connector Connect your computer with the VGA cable
(shipped with your monitor, for Japan only).
8 SuperSpeed USB
5
Gbps (USB 3.2 Gen1)
upstream port
Connect the USB cable that came with your
monitor to the computer. Once this cable is
connected, you can use the USB connectors
on the monitor.
9 SuperSpeed USB
5
Gbps (USB 3.2 Gen1)
downstream port (4)
Connect your USB 3.2 Gen1 (5 Gbps) device.*
NOTE: To use these ports, you must connect
the USB cable (shipped with your monitor) to
the USB-upstream port on the monitor and to
your computer.
To Next Page
Loading...
