Removing and installing components
This section provides detailed information on how to remove or install the components from your computer.
Recommended tools
The procedures in this document require the following tools:
• Phillips #0 screwdriver
• Phillips #1 screwdriver
• Plastic scribe
Battery cover
Removing the battery cover
1 Follow the procedure in Before working inside your computer.
2 To remove the battery cover:
a Slide the release latch towards the unlock icon to release the battery cover [1].
b Slide and lift the battery cover to remove it from the computer [2].
Installing the battery cover
1 Slide the battery cover into its slot until it clicks into place.
2 Follow the procedure in After working inside your computer.
2
8 Removing and installing components