Dell P80F - Solid State Drive Bracket; Removing the Solid State Drive Bracket

Next steps
1. Replace the battery.
2. Replace the base cover.
3. Replace the microSD card.
4. Follow the procedure in after working inside your computer.
Solid state drive bracket
Removing the solid state drive bracket
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the M.2 SSD.
Steps
1. Remove the single (M2x3) screw that secures the bracket to the palmrest [1].
2. Lift the SSD bracket of the slot on the palmrest [2].
Disassembly and reassembly
41