Removing the solid-state drive
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.
CAUTION: To avoid data loss, do not remove the solid-state drive while the computer is in sleep or on state.
Prerequisites
Remove the base cover.
Procedure
1 Locate the solid-state drive on the system board.
2 Remove the screw (M2x3) that secures the solid-state drive to the keyboard bracket.
3 Slide and remove the solid-state drive from the solid-state drive slot on the system board.
23
38 Removing the solid-state drive
To Next Page
Loading...
