Dell PowerConnect 2816 - Page 152

152 Update with your book title
• WRR — Specifies if traffic scheduling is based on the Weighted Round Robin (WRR) weights to
egress queues. The default values are:
– 8 for Queue 1
– 4 for Queue 2
– 2 for Queue 3
– 1 for Queue 4
•
WRR Weights — The WRR weight assigned to each queue.
•
WRR Percentage — The WRR percentage of each queue.
Defining the Queue Settings
When Strict Priority and Weighted Round Robin are both used, begin Strict Priority assignment from
the queues with the highest priority.
1
Open the QoS Queue Settings page.
2 Define the fields.
3 Click Apply Changes .
The queue settings are defined, and the device is updated.