Dell PowerConnect 2816 - Viewing Software and Hardware Versions

Update with your book title 61
Defining System Information:
1 Open the Asset page.
2 Define the relevant fields.
3 Click Apply Changes .
The system parameters are defined, and the device is updated.
Initiating a Telnet Session:
1 Open the Asset page.
2 Click Telnet .
A Telnet session is initiated.
Viewing the Versions Page
The Versions page contains information about the hardware and software versions currently running. To
open the Versions
page, click System→ General→ Versions in the tree view.
Figure 6-3. Versions
• Software Version — The current software version running on the device.
•
Boot Version — The current Boot version running on the device.
•
Hardware Version — The current hardware version.