Dell PowerConnect 28xx Systems User Guide 167
Parameters range
•
ip-address
— Valid IP address in the form A.B.C.D.
Command: ip default-gateway
To define a default gateway (router), use the ip default-gateway global configuration command. To
remove the default gateway use the no form of this command.
ip default-gateway
ip-address
no ip default-gateway
Syntax Description
ip-address
—
IP address of the default gateway.
Parameters range
ip-address
—
Valid IP address
Defaults
No default gateway is defined.
Command Modes
Global configuration
Interface configuration
Command: login
To change a login username, use the login command in EXEC mode.
login
Syntax Description
This command has no arguments or keywords.
Command Mode
EXEC
Command: ping
Use the ping command to send ICMP echo request packets to another node on the network.
ping {
ip-address
|
hostname
} [size
packet_size
] [count
packet_count
] [timeout
time_out
]
Syntax Description
•
ip-address
— IP address to ping.
To Next Page
Loading...
