Dell PowerConnect 28xx Systems User Guide 165
Default value
This command has no default setting.
Command: interface ethernet
To configure an interface type and enter interface configuration mode, use the interface ethernet global
configuration command.
interface ethernet
interface
Syntax Description
•
interface
— The full syntax is:
port
.
Parameters range
•
interface
— Valid Ethernet port.
Command Modes
Global Configuration
Example
Console(config)# interface ethernet g1
Console(config-if)#
Command: interface port-channel
To configure a port-channel type and enter port-channel configuration mode, use the
interface port-
channel
global configuration command.
interface port-channel
port-channel-number
Syntax Description
•
port-channel-number
— Port channel index.
Parameters range
•
port-channel-number
— Valid port channel
Command Modes
Global configuration
Usage Guidelines
Commands under the interface range context are executed independently on each interface in the range:
If the command returns an error on one of the interfaces, it will not stop the execution of the command
on other interfaces.
To Next Page
Loading...
