34 Dell PowerConnect 28xx Systems User Guide
3
Connect the female connector of the RS-232 crossover cable directly to the device Console port on the
device, and tighten the captive retaining screws. The Console port is located on the back panel.
Connecting to Console Port
Connecting a Device to a Power Supply
1
Connect the supplied standard AC power cable to the AC connector on the back panel.
2
Do not connect the power cable to a grounded AC outlet at this time. Connect the device to a power
source in the steps detailed in Starting and Configuring the Device.
Figure 3-4. Connecting to Power Supply
3
After connecting the device to a power source, confirm that the device is connected and operating
correctly by examining the LEDs on the front panel.
To Next Page
Loading...
