Dell PowerConnect 2816 - Page 70

70 Update with your book title
4 Click Apply Changes .
The user access rights and passwords are defined, and the device is updated.
Defining a New User:
1 Open the Local User Database page.
2 Click Add .
The
Add User page opens:
Figure 6-10. Add a User
3 Define the fields.
4 Click Apply Changes .
The new user is defined, and the device is updated.
Displaying the Local User Table:
1 Open the Local User Database page.
2 Click Show All.
The Local User Table opens:
Figure 6-11. Local User Table
Deleting Users:
1 Open the Local User Database page.