Dell PowerConnect 2816 - Page 77

Update with your book title 77
Figure 6-17. Add SNMP Community
3 Select one of the following:
–
SNMP Management Station — Defines an SNMP community for a specific management station.
–
All — Defines an SNMP community for all management stations.
4 Define the remaining fields.
5 Click Apply Changes .
The new community is saved, and the device is updated.
Displaying all Communities
1 Open the SNMP Community page.
2 Click Show All.
The Community Table opens:
Figure 6-18. Community Table
Deleting Communities
1 Open the Community Table page.
2 Click Show All.
The Community Table opens.
3 Select a community from the Community Table.