Dell PowerEdge C6100 - POST Error Codes

Using the Baseboard Management Controller 23
Table 1-20. PEF and Alerting Commands (NETFUN: 04H, 05H)
Commands NetFn CMD O/M Supported
Get PEF Capabilities S/E 10H O Yes
Arm PEF Postpone Timer S/E 11H O Yes
Set PEF Configuration Parameters S/E 12H O Yes
Get PEF Configuration Parameters S/E 13H O Yes
Set Last Processed Event ID S/E 14H O Yes
Get Last Processed Event ID S/E 15H O Yes
Alert Immediate S/E 16H O Yes
PET Acknowledge S/E 17H O Yes
Table 1-21. SEL Commands (NETFUN: 0AH, 0BH)
Commands NetFn CMD O/M Supported
Get SEL Info Storage 40H M Yes
Get SEL Allocation Info Storage 41H O
Number of possible allocation units: 909
Unit size in bytes: 18
Max record size in allocation units: 18
Yes
Reserve SEL Storage 42H O Yes
Get SEL Entry Storage 43H M Yes
Add SEL Entry Storage 44H M Yes
Partial Add SEL Entry Storage 45H N No
Delete SEL Entry Storage 46H O Yes
Clear SEL Storage 47H M Yes
Get SEL Time Storage 48H M Yes
Set SEL Time Storage 49H M Yes
Get SEL Time UTC Offset Storage 5CH O Yes
Set SEL Time UTC Offset Storage 5DH O Yes
Get Auxiliary Log Status Storage 5AH N No
Set Auxiliary Log Status Storage 5BH N No