Figure 57. Installing the PCIe extender or storage controller card
1. retention screw (2) 2. slot on the PCIe extender or storage
controller card
3. tab on the PCIe extender or storage
controller card support bracket
4. standoff (2)
1. Install the following:
a. Hard drives or SSDs
b. Hard drive or SSD backplane
c. Hard drive or SSD cage
2. Follow the procedure listed in the After working inside your system section..
Related Links
Safety instructions
Removing the PCIe extender or storage controller card
After working inside your system
Installing a hard drive or SSD
Installing the hard drive or SSD backplane
Installing the hard drive or SSD cage
119
To Next Page
Loading...
