Dell PowerEdge FC630 - Installing Memory Modules

3. Remove the memory module from the socket.
Figure 16. Removing the memory module
1. memory module 2. memory module socket
3. memory module ejector (2)
1. If you are removing the memory module permanently, install a memory module blank. If you are
installing a new memory module, see the Installing the Memory Module section.
2. Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Installing memory modules
Before working inside your system
After working inside your system
Installing memory modules
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
NOTE: You must remove a memory module to upgrade a memory module or replace a faulty
memory module.
1. Follow the safety guidelines listed in safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. If installed, remove the memory module or the memory module blank.
71