Figure 21. Replacing the USB memory key
1. USB memory key 2. USB memory key connector
Figure 22. Installing the USB memory key
1. USB memory key 2. USB memory key connector
1. Follow the procedure listed in the After working inside your system section.
2. Enter the System Setup and ensure that the USB key is detected by the system.
Related Links
Safety instructions
Before working inside your system
After working inside your system
Removing the optional IDSDM card
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Follow the safety guidelines listed in safety instructions section.
2. Keep the Phillips #2 screwdriver ready.
3. Follow the procedure listed in After working inside your system.
78
To Next Page
Loading...
