Dell PowerEdge FC630 - SD Vflash Card; Replacing the SD Vflash Card

Figure 26. Installing the optional rSPI card
1. screw (2) 2. rSPI card
3. standoff (2) 4. connector
Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system
Removing the optional rSPI card
After working inside your system
SD vFlash card
A vFlash SD card is a Secure Digital (SD) card that plugs into the vFlash SD card slot in the system. It
provides persistent on-demand local storage and a custom deployment environment that allows
automation of server configuration, scripts, and imaging. It emulates USB devices. For more information,
see the
Integrated Dell Remote Access Controller User’s Guide at Dell.com/idracmanuals.
You can use an SD vFlash card with your system. The card slot is on the IDSDM card. You can remove
and install the SD vFlash card.
Replacing the SD vFlash card
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Follow the safety guidelines listed in safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
1. If installed, remove the SD vFlash card from the card slot.
83