Dell PowerEdge R430 - Installing an Optional SD Vflash Card

Figure 56. Removing the optional SD vFlash card
1. SD vFlash card 2. SD vFlash card slot
Related Links
Safety instructions
Installing an optional SD vFlash card
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. Locate the SD vFlash card slot at the back of the chassis.
Steps
1. Install a the SD vFlash card by inserting the contact-pin end of the SD vFlash card into the SD vFlash
card slot on the iDRAC port card module.
NOTE: The slot is keyed to ensure correct insertion of the SD vFlash card.
2. Press the SD vFlash card inward to lock it into the SD vFlash card slot.
Figure 57. Installing an optional SD vFlash card
Related Links
Safety instructions
133