Cabled PSU back panel features
Figure 8. Cabled PSU back panel features
1. Serial connector 2. Ethernet connector 1
3. vFlash card slot (optional) 4. iDRAC port (optional)
5. PCIe expansion card slots (2) 6. Video connector
7. Ethernet connector 2 8. USB connector
9. USB connector 10. System identification button
11. System identification connector 12. Ethernet connector 3
13. Ethernet connector 4 14. Cabled PSU
Table 7. Cabled PSU back panel features
Item Indicator, Button, or
Connector
Icon Description
1 Serial connector
Use the serial port to connect a serial device to the
system. For more information about the supported
serial port, see the Technical specifications section.
2 Ethernet port 1
Use the Ethernet port to connect Local Area
Networks (LANs) to the system. For more
information about the supported Ethernet ports,
see the Technical specifications section.
3 vFlash card slot
(optional)
Use the vFlash media card slot to insert a vFlash
media card.
4 iDRAC port (optional)
Use the iDRAC8 Enterprise port to remotely access
iDRAC. For more information, see the Integrated
Dell Remote Access Controller User’s Guide at
Dell.com/idracmanuals.
5 PCIe expansion card
slots (2)
Enables you to connect two PCI Express expansion
cards.
6 Video connector
Use the video/VGA port to connect a display to the
system. For more information about the supported
22
To Next Page
Loading...
