Figure 85. Installing the eight 2.5 inch SAS/SATA backplane
1. hard-drive/SSD backplane 2. backplane power cable
3. backplane signal cable 4. SAS_A cable connector
5. release tab (2) 6. SAS_B cable connector
7. hard-drive/SSD connector (8)
Figure 86. Installing the ten 2.5 inch SAS/SATA backplane
1. hard drive/SSD backplane 2. backplane power cable
3. release tab (2) 4. SAS_A connector on the backplane
5. hard drive/SSD connector (10) 6. SAS_B connector on the backplane
170
To Next Page
Loading...
