CAUTION: Take care not to damage the system identification button while removing the
system board from the chassis.
2. Remove the nine screws on the system board and slide the system board toward the front of the
system.
3. Hold the system board t-handle and lift the system board out of the chassis.
NOTE: To prevent damage to the system board, ensure that you hold the system board by its
edges only.
CAUTION: Do not lift the system board by holding a memory module, processor, or other
components.
Figure 101. Removing the system board
1. screw (9) 2. system board
3. system board t-handle
185
To Next Page
Loading...
