Dell PowerEdge T410 - Front-Panel Features and Indicators

Dell
PowerEdge T410 Technical Guide 12
4 Mechanical
4.1 Chassis Description
The PowerEdge T410 is a tower chassis design that is available in cabled hard drive or hot-plug hard
drive configurations. The chassis supports the following features:
 Flexible power supply (redundant or non-redundant)
 Two fixed hard drive cages (cabled and hot-plug chassis)
 Common power-supply bay to accommodate two power supplies (non-redundant and
redundant)
 User-friendly chassis—most devices are toolless:
o Hard drives (cabled and hot-plug)
o Optical drive and tape backup unit
o Fans
o Expansion cards
o Planar
o Backplane
o Power distribution board
o Redundant power supply (non-redundant power supply is secured with three screws)
4.2 Dimensions and Weight
Xa
Xb
Ya
Yb
Yc
Za
(With
bezel)
Za
(Without
bezel)
Zb*
Zc
Max
Weight
217.9mm
282.5mm
433.3mm
444.9mm
N/A
37.0mm
21.5mm
574.8mm
579.8mm
28.4kg
(62.61lbs)
*Note: Zb goes to the nominal rear wall external surface where the motherboard I/O connectors reside.
Figure 1. Chassis Dimensions