Dell PowerEdge T410 - Mirroring; Supported Configurations

Dell
PowerEdge T410 Technical Guide 29
and two-thirds of the total installed memory is usable and is the amount reported during POST and in
BIOS setup.
7.8 Mirroring
The T410 system supports memory mirroring if identical memory modules are installed in the first
two channels and no memory is installed in the 3
rd
channel. Mirroring must be enabled in the System
Setup program. In a mirrored configuration, the total available system memory is one-half of the
total installed physical memory.
7.9 Supported Configurations
See the System Memory section in the Installing System Components chapter in the Dell PowerEdge
T410 Systems Hardware Owner's Manual on Support.dell.com.