Dell PowerEdge T410 - Processor Configurations; Processor Installation

Dell
PowerEdge T410 Technical Guide 26
Model
Speed
Power
Cache
Cores
QPI Speed
E5640
2.66GHz
80W
12M
4
5.86GT/s
E5630
2.53GHz
80W
12M
4
5.86GT/s
E5620
2.40GHz
80W
12M
4
5.86GT/s
E5530
2.40GHz
80W
8M
4
5.86GT/s
E5607
2.26GHz
80W
8M
4
4.8GT/s
E5606
2.13GHz
80W
8M
4
4.8GT/s
E5506
2.13GHz
80W
4M
4
4.8GT/s
E5603
1.6GHz
80W
4M
4
4.8GT/s
E5503
2.00GHz
80W
4M
2
4.8GT/s
6.4 Processor Configurations
The PowerEdge T410 will operate with either a single processor or dual processors. However, since
the memory controller is embedded in the processor, when only one processor is installed in the
system, it supports 4 DIMMs, minimum 1GB and maximum 64GB. When two processors are installed in
the system, it supports 8 DIMMs, minimum 2GB and maximum 128GB.
6.5 Processor Installation
Refer to the Processors section in the Installing System Components chapter of the Dell PowerEdge
T410 Systems Hardware Owner’s Manual on Support.Dell.com for processor installation and removal
instructions.